|
WTW CW-8 Cooling Tower and Corrosion Control
Products
General Information: Although the name
“cooling tower treatment” is familiar, we could better call these products
“heat exchanger treatment.” WTW products are formulated to provide scale and
corrosion control in a wide range of field conditions and especially at the heat
exchange area where efficiency is gained or lost. WTW cooling tower products are
formulated based on:
Safety for personnel and systems
Dischargeability
Broad range of
field conditions
CW-8
Scale and Corrosion Inhibitor is designed for
systems using makeup water of moderate hardness and alkalinity. Formulated with no metals or orthophosphates, this product
meets typical sewer discharge parameters and all but the most stringent direct
outfall parameters. It is
controlled by an Organo Phosphonate test or fed volumetrically. This product is USDA G7.
Handling Information:
CW-8 can be
handled in accordance with the Material Safety Data Sheet.
Keep container tightly closed when not dispensing chemical
Packaging and Shipping: All containers are
non-returnable. F.O.B. Cloverdale, Indiana.
| Cooling
Tower and Corrosion Control Products |
| Product |
Initial Amount |
Test Method |
Test Frequency |
Test Values |
| CW-8 |
Usage
Rate = 200 ppm of product
|
Organo
Phosphonate
|
2-3 days
|
varies
under use conditions
|
WTW Technical
Library: Bulletin
CW-8
©1998 Water Treatment Warehouse, Inc.
Cloverdale, IN
|
